Safety Vest with Fans: How It Works and Who Needs One


A safety vest with fans is a hi-vis vest with small fans built in. The fans pull outside air into the vest and move it across your body, so sweat evaporates instead of soaking your shirt. It's a way to stay cooler on the job without ice, refrigerant, or a freezer.

This guide covers how it works, which crews use one, and where it doesn't belong.

What is a safety vest with fans?

It's three parts working together: a hi-vis vest, a pair of small fans at the lower back, and a rechargeable battery. Some vests are sold as the shell only. ZIPPKOOL's vest and jacket ship as a complete set, with fans, battery, and cable in the box.

Fan-cooled workwear started in Japan, where it has been on sale since 2004. It's still new to most US crews.

How it works

  1. Air comes in. The fans draw outside air into the vest.
  2. Air moves across you. The vest inflates and channels the air across your back and chest.
  3. Sweat evaporates. Moving air lifts sweat off your skin as vapor and carries body heat with it.

Evaporation is what cools you. Under a regular work shirt in still air, sweat just soaks into the fabric. For more on the science, see our guide to evaporative cooling in workwear.

Who needs a safety vest with fans

Any crew that works hot, in hi-vis, with little shade or airflow:

  • Road and highway crews. Lane closures have no shade, and flaggers stand still for hours. Work near traffic usually needs Class 3.
  • Construction crews. Concrete and steel hold heat, and a harness and hard hat add more. Class 2 covers most sites.
  • Warehouse and logistics workers. There's no sun, but there's also no breeze, and heat builds through the shift.
  • Manufacturing workers, in areas away from hot work.
  • Landscaping and grounds crews. Full sun all day, with no cooler on the truck.
  • Utility crews, for tasks that don't need flame-resistant clothing.

See our Industries page for how each trade uses it.

Who shouldn't use one

  • Hot work. Welding, cutting, and grinding need flame-resistant clothing. A fan vest isn't FR.
  • Explosive atmospheres. It isn't intrinsically safe, so keep it out of areas with flammable gases, vapors, or combustible dust.
  • Arc flash tasks. Use arc-rated PPE instead.
  • Near rotating machinery. A running fan inflates the vest. Turn the fans off and zip it near shafts, conveyors, and augers.

It also works less well in sustained very high humidity, or when the air is hotter than your skin. And it supplements water, rest, shade, and acclimatization. It doesn't replace them.

What to look for

  • ANSI/ISEA 107 class and Type. Class 2 covers most work zones, warehouses, and general construction. Class 3 is for roadway and traffic work, and Type R is the roadway designation.
  • Harness compatibility. Look for a rear opening that lets the dorsal D-ring pass through.
  • Battery certification. Many sites only allow NRTL-certified batteries. Look for a mark like ETL from Intertek.
  • What's in the box. Check whether the price includes the fans, battery, and cable.

Our cooling vest buyer's guide covers each of these in more detail.

FAQ

Do safety vests with fans work?

Yes, in most conditions. They work best in hot, dry, or moderately humid air, and less well in sustained very high humidity.

How long does the battery last?

Battery packs run roughly 6 to 20 hours per charge, depending on the pack and the fan speed.

Can I wear one with a fall-protection harness?

Yes, if the vest has a rear opening for the dorsal D-ring. The vest isn't part of the fall-arrest system.

Is a safety vest with fans ANSI approved?

ANSI doesn't approve products. Manufacturers declare conformity to ANSI/ISEA 107, and the class and Type should be on the label. ZIPPKOOL's HVN-400U vest is Type R, Class 2 (manufacturer's declared conformity).

Can I wash it?

Yes, after removing the fans, battery, and cable. Check the care label for the wash-cycle limit.

Does it work with a hard hat?

A helmet cooler clips onto a full-brim hard hat and moves air inside the helmet. It's an accessory and doesn't replace the hard hat.

Talk to us about your crew

Volume pricing, Net 30 terms available for qualified business accounts, and complete compliance documentation for your approval process.

Contact us · Download spec sheets

References

  1. MIT School of Engineering. Why do we sweat more in high humidity?
  2. OSHA and NIOSH. Protecting Workers from Heat Illness (infosheet).
  3. Nippon.com. Cool Innovation: The Story of Air-Conditioned Clothing.